Agro Kit HS10000-24V

Description

Hydrogen systems for tractors are easy and quick to install. They can be fitted to any tractor with a 24 volt system, without any engine modifications or tampering with the fuel management or electrical systems. No computer software, programming, setting up, timing, or mixture adjustments are required for the vehicle. Fuel-saving systems have built-in fully automatic start, automatic stop, and automatic safety shutdown control thanks to our Dynamic PWM for diesel 24V, which is included in this system.

The system is compact, easy to install, and uses high-quality components. It also has a fully automated Ampere limiter built-in, with no run-on after shutdown and no backfire possibility. There is a water level sensor and the system can run for more than 24 hours with one tank of distilled water.

Equipped with Dynamic PWM to control the amperes and production of Hydrogen gas depending on many different factors, such as temperatures, density of electrolyte, voltage, resistance, condition of your charging system, battery, etc. There is an LED indicator installed in the driver’s cabin near the dashboard to alert when the reservoir needs to be refilled.

Technical Data of the Hydrogen System

Voltage: 24 – 29 VDC (from vehicles battery)
Amperage: 3 to 30 Amp
Weather and water-proof casing.
Ventilated.

The Plug N Play Hydrogen system includes:

HHO Dry cell -1 pc.
HHO tank/reservoir 15 liter – 1 pc.
HHO bubbler – 1 pc.
tubing – 6m.
Wires:
Red 6 sq.mm. – 3.00 m
Black 6 sq.mm. – 2.00 m
Blue 1.5 sq.mm. – 3.00 m
Automatic fuse  – 30 amps -1pc.
Inlet gas connector – 1pc.
All electrical connectors
Installation instruction + scheme
Instructions for use